Merlyn, Huntsman & Air Ranger - trigger adjustment
two-stage trigger - Allen Key Size: 1.5 mm
Note: It is advisable to remove the rifle's action and trigger guard from the stock to adjust the trigger.
1st adjustment: Adjusts the second stage weight setting. Remove the locking screw. To increase the weight, turn the screw anti-clockwise and clockwise to lighten the weight. IMPORTANT. Adjusting this screw too far clockwise will cause the sear NOT to engage and the gun will not cock.
2nd adjustment: Enables you to set the angle that the trigger blade sits in the trigger block, factory setting is approximately 90o. If this is adjusted then the 3rd adjustment will have to be altered.
3rd adjustment: This screw will adjust the first stage travel. Turning it anti-clockwise will increase the travel and clockwise will decrease the travel.
