Daystate - MK4 & Air Wolf - Power settings

MK4 & Air Wolf - Power settings

The programming mode is entered by ensuring the gun is unloaded, in the safe position, pointing the muzzle in a safe direction (down) and pulling the trigger, then switch the safety catch to FIRE. The gun will then beep and flash indicating that the gun is in program mode. If the trigger is kept pulled, the gun will cycle through its programming mode and will beep and flash the appropriate amount of times, indicating the mode it is in.

The user can adjust the muzzle velocity. The gun is supplied at a maximum power setting depending on local legislation and model type. The adjustment will allow the user to adjust the gun to lower power levels for other applications in 16 discrete steps.

Power Setting Programming

• Ensure that the gun is unloaded and the safety switch is in the safe position
• Ensure the isolator switch is set to on and the gun is pointed in a safe direction. Pull the trigger and then set the safety switch to FIRE with the trigger still pulled. A red light will be on
• A single beep will be heard and the red LED will blink once, keep the trigger pulled so that there is a series of beeps and blinks given at 3 second periods, release the trigger when 6 beeps and blinks are noted
• MVT models:
• The gun will now be set at maximum power; every time the trigger is pulled the power will be reduced one step. The size of the step will depend on calibre and model of gun
• When the required power setting has been selected, switch the safety switch to SAFE; the power setting is now programmed