Latest News

Mick Garvey secures a lifetime supply of compressed air,
courtesy of the DS Type2 compressor

One thing that has become apparent over the last few months whilst living with the knock-on effects of the CV-19 lockdown – I need air, and lots of it1 Over the last few months, I have had to be rather conservative with my air usage, to the point where I was checking the air level before planning a pest-control trip. With so much time on my hands, I dedicated much of it to researching various options, from the budget Chinese compressors through to the mid-range units, and all the way up to the high-end Daystate compressor. Videos were stacked up in my laptop for endless viewing, and certain units were dismissed immediately, whilst others were put onto the ‘requires further investigation’ file.

The Daystate T2 Air Compressor ("Type 2") is a sophisticated unit to charge your PCP airgun and air tank

What’s Changed with Daystate’s new sporter?

Mike Morton tests the Daystate Huntsman Revere and finds a rifle that stays true to its traditional roots while adding in some modern twists

Daystate’s bestselling rifle is the Huntsman, and while it’s been subjected to numerous redesigns and improvements, it can still trace its lineage back to when the company started out more than 40 years ago. But it’s those redesigns and improvements that have maintained the Huntsman’s presence over the decades, with the latest incarnation being the Revere.

Part of the Huntsman’s appeal lies in its traditional looks, with the bulk of the air cylinder being seated deeper in the stock, making it look more like a rimfire rather than an airgun, and with the Revere, Daystate has managed to retain that slimline sporter appeal, while making some exciting changes. Traditionalists needn’t worry about these alterations though, because the Revere will sit alongside the bolt-action Regal rather than replace it. Instead of a turn-bolt, the Revere offers a sidelever cocking action paired with a new gate-loading magazine that has an increased shot capacity – 13 pellets in .177, 11 in .22 and 10 in .25 calibre. It also combines the latest version of the Huntsman’s hammer and valve system with the Huma regulator that first appeared on the HR Huntsman Regal. Why the need for change? Well, sidelever actions are generally faster to operate and require less cocking effort on behalf of the shooter, making them especially useful for higher-powered rifles, and in FAC format the Revere offers up to 18 foot pounds of muzzle energy in .177 calibre, 30 in .22 and 40 foot pounds in .25.

STOCK The Revere is available as either a dedicated right- or left-handed rifle, with the stock, the sidelever cocking action and the way the magazine is inserted all switching sides depending on what the shooter’s preference is. The stock will be familiar to any existing Huntsman owners, as it’s the same one that appears on the Regal. This is a beautiful oiled walnut stock made by Minelli, and it manages to be both elegant and practical, thanks to the panels of chequering that adorn the pistol grip and the long, slim forend. Four separate panels have been used on the forend to create a flowing design that covers the belly of the stock, providing additional grip for the leading hand.      The curved blade lets you eke the best performance out of the trigger unit, which broke cleanly on the test rifle with a trigger-pull of 1lb 2oz The Revere comes in either a dedicated right- or left-handed stock with a raised comb and a rollover cheekpiece At the butt end, there’s a ventilated brick red rubber shoulder pad with a black spacer, and in keeping with the Huntsman’s traditional design, the pad is not adjustable for height or cast. Moving forward, there’s a pronounced cheekpiece with a raised rollover comb, which makes it feel more comfortable against the face. The pistol grip has quite a shallow rake, which fits the traditional design brief of the Huntsman, although my preference is for a steeper rake. In general, a shallow rake will let you get on aim more quickly, while a steeper one is slower, but can be more comfortable and offers more control. What I do appreciate, however, is the provision of a thumb shelf which lets the shooter adopt a thumb-up grip. Weighing 2.8kg unscoped, and with the centre of balance being just forward of the polymer trigger guard, the Revere is certainly a handy little sporter, being very quick to shoulder from a variety of stances, such as standing and kneeling, while the long forend makes it suitable for shooting off sticks.

FIT, FINISH AND FUNCTION

The action block, shrouded barrel and air cylinder have been given a black finish that’s almost matt in appearance, which will be less reflective in the field. Hunters will also appreciate the red anodised safety catch at the rear of the action block, which should be turned clockwise for ‘fire’ and is quiet in operation. The barrel is shrouded, but the muzzle crack is still a little snappy, so I fitted a 0Db moderator during my test period, which extends the overall length of the Revere, but didn’t appear to harm the way it handled. Contrary to many other Daystate rifles which use a Foster connector, the Huntsman uses a fill probe, the port for which is kept clean behind a twist-to-open collar that’s located just in front of the barrel band. Air is   delivered via the Huma regulator, and it’s safe to fill this rifle all the way to its standard working pressure of 250 bar, which delivered around 140 shots in the .177 calibre sub-12 foot pound rifle that I had on test. The biggest difference between the Revere and the Regal is of course that sidelever action, which features a biathlon-style handle, making the lever easy to locate and almost effortless to cycle. I initially adopted a pinch-grip on the lever to cock the action and index the magazine, but actually found it quicker just to use one finger. Daystate has made an excellent job of this system and diehard bolt-action fans should really give this a go – they may be more than pleasantly surprised. The next big change is Daystate’s new-style drum magazine, which as well as providing a greater shot capacity is quite different to what we’ve seen before. While at a glance it looks similar to Daystate’s older magazines, the new mag is larger, and this may well affect your choice of scope and mounts as it sits higher in the breech than Daystate’s previous designs.

CONTRARY TO MANY OTHER DAYSTATE RIFLES, THE HUNTSMAN USES A FILL PROBE

As well as needing high mounts to fit the dovetail rail, you’ll also need to keep an eye on the size and shape of the saddle on the scope tube to make sure it doesn’t come into contact with the magazine. The test rifle came already equipped with a little MTC Mamba Lite 3-12×42, and this was a good choice as the Revere is a dainty rifle and a larger optic would probably have affected its fasthandling capabilities. Turning our attention back to the magazine, the new design features a hinged faceplate that must be opened to reveal the inner rotor. To load the magazine, drop a pellet into the bottom chamber – the one that aligns with the bore – then turn the rotor clockwise, dropping pellets into the remaining chambers as you go. The rotor is under some mild spring tension as you turn it, but a small post has been machined into the backplate which makes contact with the last pellet loaded, and this stops the rotor from unwinding should you let go of it by mistake. With all the chambers filled, you can go ahead and close the faceplate, which is held firmly in place by a small, but very powerful magnet. Depending on the diameter of the specific pellets you’re shooting, they may be a loose fit in the rotor. They won’t fall out with the faceplate closed, but for a belt and braces approach you can thumb them deeper into the rotor so they’re held more securely. With the faceplate swung down and out of the way for loading, this system is much faster and easier than with the previous magazine designs. Anyone not needing the fast-fire capability of the high-capacity magazine can fit the optional single-shot tray. This is Daystate’s more recent style, being a polymer body with a deep loading channel that’s secured by two locator pins and magnets.

READY FOR THE RANGE

The test rifle was configured for a right-handed shooter, and this means the magazine must be inserted from the right, as it uses a small magnet and locator pin to correctly seat the magazine. The magnet and pin are fixed and can’t be swapped round, but it is possible to order a lefthanded Revere with the mag entering from the left, or order a left-handed magazine as a spare. While older magazines can’t be used in the new action, the new magazine is compatible with other rifles such as the Wolverine, Pulsar, and the Huntsman Regal.

THE MAGAZINE WORKED WELL AND THE SIDELEVER WAS EXCEPTIONALLY SMOOTH

The faceplate has a series of cutouts through which you can look to give you an idea of how many pellets you have remaining, but in practice I found it easier just to rely on touch – when you close the sidelever you can feel a slight resistance as the pellet is probed forwards into the bore. Do keep an eye on your ammo count though, because it is possible to double-load the Revere if you’re not paying attention. The trigger is very good for a mechanical rifle, with the wide, curved blade delivering plenty of feedback and control. First-stage travel came to a definite stop, while the second stage broke cleanly with 1lb 2oz of triggerpull. That’s a tad light for the field, and I’d adjust it a little heavier if I was taking it hunting, but since it wasn’t necessary, I left it as it came during the test period.

 

Chrono testing was impressive. Using Rangemaster Sovereign pellets, which weigh 8.4 grains, the Revere delivered a 10-shot string with an average muzzle velocity of 763.3 feet per second, a muzzle energy of 10.87 foot pounds and a 4.6 feet per second velocity spread. By the time I’d taken my first 40 shots I’d managed to lead the barrel and zero the Revere at my usual distance of 30 yards, and had also managed to put 13 pellets – a whole magazine’s worth – into a one-hole group measuring 6.4mm. I’d be more than happy to achieve that with a rifle that’s been well run in after hundreds of shots, let alone a brand new one. I’ll typically shoot two or more different pellets through a test rifle to see if group size can be shrunk further, but was pleased enough with the Sovereigns, so stuck with those. Back at 40 yards, and remember this was with that little 3-12x scope up top, the Revere was happy to churn out five-shot groups measuring around 11mm centre-to-centre. Needless to say, I was impressed by this gun. Coming in at £1,068.57 for the sub-12 foot pound rifle I had on test, it’s certainly not cheap, but it does ooze quality. I didn’t manage to get perfect head and eye alignment due to the height of the scope and the non-adjustable nature of the stock, but the magazine worked well and the sidelever was exceptionally smooth. While I will always enjoy shooting guns with a turn-bolt action, I’ve become something of a sidelever believer over the past few years, and the Revere is a perfect example of what makes this system so good. I had the chance to shoot the Revere alongside a Regal for a direct comparison, and even the owner of the Regal admitted the Revere was smoother and faster to operate. But Daystate has cleverly covered both bases with the Huntsman. Sporting rifle purists can carry on enjoying this rifle in old school bolt-action Regal format, while anyone appreciating the speed and slickness of the new action can choose the Revere.

Mat Manning heads out on his first hunting trip with the Huntsman Revere and explains how to keep on top of bushy-tails in warm weather.

Too many shooters give up on grey squirrel control during the warmer months as they deem it to be a waste of time when the trees are in full leaf and quarry is hard to spot. This gives squirrels an easy opportunity to bounce back as they produce litters of young in the spring and at the end of the summer. Leave squirrels unchecked for just a few months at this time of year and all your hard work will quickly be undone; the tree damage caused by their bark-stripping, their predation of songbird eggs and chicks, and their impact on native mammals by spreading disease and outcompeting for food and habitat will quickly spiral back to where it was before your pest control efforts got underway.

Fortunately, there is a very easy way to keep the squirrel cull rolling even when it is impossible to see anything up in the dense summer canopy. The solution is to set up feeding stations and draw squirrels out into the open where you can get clear shots. Load a hopper (either homemade or shop bought) with peanuts, keep it topped up for a couple of weeks while the squirrels home in and gain confidence and you’ll be able to snipe them from a hide about 20m away.

My latest outing after grey squirrels was based at a feeder that I’d shot twice before in the past couple of weeks. It had already produced good bags, which is always encouraging, but this session was particularly exciting as it was my first trip into the field with the new Daystate Huntsman Revere. The Huntsman was already a great airgun but the Revere sees the addition of some neat new features including a sidelever action and a new magazine that holds 13 shots in .177 calibre, 11 in .22 and 10 in .25. Coupled with an MTC Mamba Lite scope and Daystate Rangemaster Sovereign pellets, it had already given a great account of itself on the range and I was eager to put it to work on some pest control.

It was set to be a hot day so I arrived in the woods just after daybreak in the hope of snatching a few hours before the heat became unbearable. I had topped up the feeder on the previous day so I could head straight to the hide without disturbing the feeding station. My hiding place comprised two camouflage nets; one set up to create a screen in front of me and the other behind to make a backdrop to obscure my outline. I chose a site in deep shade, to boost my concealment and to keep me out of the heat of the sun, just over 20m from the feeder.

The squirrels were certainly eager to get back to the peanuts, and the first once actually showed up while I was still settling in. I glanced up after putting my shooting sticks in place and the greedy little rodent was sat on top of the feeding station – proof that my arrival had caused minimal disturbance. The oblivious squirrel was soon framed in the Mamba Lite’s sight picture, the crosshairs came to rest on its skull, I applied a touch of hold-under to compensate for the relatively close-range shot and touched off the trigger. The pellet connected with a loud smack and the squirrel dropped with barely a twitch.

If I had needed a rapid follow-up shot, it would have been right on hand. The biathlon type dropdown handle of the Revere’s new sidelever already comes to hand very instinctively to cock the gun, index that slick new magazine and probe the next pellet into the breech ready for action. It’s a pleasure to use and is very fast and smooth.

Only a few minutes passed before another squirrel turned up at the feeding station. Shooting from the support of sticks over such a modest range, pellet placement was a mere formality for the Revere, and another unlucky bushy-tail was soon added to the morning’s tally. And that’s the pattern that the session followed for the next couple of hours.

As the sun climbed up over the treetops, the action gradually slowed down and the combination of heat and hunger soon had me heading for home. It had been a productive morning, though, and I had managed to account for nine squirrels in just over two hours. That’s another nine tree-rats that won’t see the late-summer breeding season, and clear proof of the importance of keeping the cull running right through the summer.

Apart from bringing more destructive squirrels to book, the morning had also been an excellent opportunity for the Huntsman Revere to prove what it can do, and it passed the test with flying colours. Not only is it an excellent airgun in terms of its performance, it is also a real looker. Daystate may have equipped this rifle with some neat new features but I am delighted that it has maintained the appearance of a classic sporting rifle.

Introducing the Daystate Huntsman Revere

With classic sporter looks, sleek design and a lineage that can be traced back to the inception of the company over 40 years ago, Daystate’s Huntsman series is one of the most iconic lines the airgun world. Often copied, but never bettered, the Huntsman remains Daystate’s best-selling model, with its 2013 Regal variant attracting record global demand from shooters after the perfect combination of performance, handling and style. Now, though, the Huntsman has got even better!

Richard Saunders – Hunting Consultant

Whilst the country is on lock down, opportunities to get out in the field have been put on hold. Daystate hunting consultant Richard Saunders has been going back through his shooting diary and recalling some memorable recent trips. We thought we’d share a few with you, and by all means feel free to tell us about your hunting trips too.

I spent this evening after rabbits on a permission in the village only a few minutes down the lane. While I was lying in the grass, waiting in ambush, it occurred to me that I was being like one of those anteaters you see on the telly.

I should explain.

The Red Wolf! Some say is the Ferrari of airguns, and I agree. The Daystate Redwolf screams quality. This is the first time that I have a Daystate gun and I am impressed. It is very accurate (submoa @ 100 y). The highest point is the trigger, by far the best trigger I have ever tested, just like a mouse click. Hate it tho, only because after shooting with that trigger all others feel hard! Jaja. I feel this gun is perfect for those that like to aim and shoot, and do not want to get into the internals or spend time testing. Out of the box shoots very good. Oh! Almost forgot, sadly does not come with a picatinny rail for a bipod, easy fix, but IMO it should come with one, drill the Minely stock is not something I do with pleasure jaja. For me, the main use is BenchRest but no doubt in my mind that in the field will perform.

Accuracy
⭐️⭐️⭐️⭐️⭐️ 5 stars, but a warning: because and due it has a LW Poligonal Barrel, sometimes the barrel need a good polish, other is good as is. A barrel that need polish send gruops @ 100y moa+ and after polishing you will get submoa. LW barrels are like that, sometimes you get a match grade one and other you need to work on it to get the best of it. New LW ART barrels fix that, so my suggestion: Ask for it (even when cost a bit more)

Edosan

READ THE FULL ARTICLE

The worlds’ most advanced airgun is here!

The Delta Wolf heralds the birth of a new family of electronic precharged pneumatic (PCP) airguns for the decade ahead. The advent of this technology truly reinforces Daystate’s reputation as maker of the world’s most advanced airguns. Nothing like Delta Wolf has been attempted in either the airgun – or firearm – worlds before.

Key Features:

  1. New Advanced Velocity Technology (AVT) with display touch screen
  2. Multi calibre with fast-change barrel system
  3. Factory-set power profiles for each calibre
  4. Shooter tuning customization
  5. Exclusive OEM Huma-Air Regulated
  6. New large capacity magazine
  7. A.R.T-approved barrel
  8. Bluetooth connectivity
  9. Superior Silencing
  10. Modular ‘Tactical’ format
  11. Future proofed – upgradable as features develop

DeltaWolf in supplied case

Delta Wolf is the first Daystate to adopt an advanced tactical form factor that has proven popular with shooters across multiple disciplines – but make no mistake; Delta Wolf is the worlds most advanced airgun and represents two years of development and investments that, courtesy of newly-filed patents, will make it a very hard act to follow, let alone actually beat!

New larger capacity and fast loading magazine system

Full Features:

  1. The Delta Wolf features new Advanced Velocity Technology (AVT) electronic management system that makes the Delta Wolf the most advanced Airgun in the world.
  2. Available in all popular calibres, .177, .22, in 43cm barrel and .177, .22, .25 & .30 in 60cm barrel with the ability for the shooter to switch barrel/calibres without special tools
  3. Electronically pre-programmed for quick power and calibre changes
  4. With its unique built -in chronoscope, the Delta Wolf corrects velocity while also allowing the shooter to dial in their preferred feeeet per second
  5. Adjustable 22mm picatinny scope rail and cheek-piece for different scope type/eye relief
  6. Picatinny under and side rails for a range of accessories
  7. AR style switchable pistol grip, familiar AR style safety
  8. A newly developed magazine system with a larger capacity from 8 – 13 shots (according to calibre) with the ability to pair magazines in the breech – to double shot count to 16-26 shots
  9. The Delta Wolf action is user-tuneable for different velocity and power levels with different ammunition types
  10. The Delta Wolf’s 430 and 600mm A.R.T-developed barrels are compatible with the latest generation of airgun ‘slug’ ammunition
  11. A Bluetooth module allows the DeltaWolf to connect in the future to other accessories and apps
  12. Superior ergonomics with fast-switching side lever action – conversion from left to right in around a minute
  13. Adjustable but pad with optional exclusive PRS accessories to add an expanding range of custom accessories
  14. With is larger 30mm diameter carbon fibre shroud the DeltaWolf is a rifle to be seen but not heard. Its new shroud and optional 0db silencer justwipe out decibels
  15. Removable bottle – carry extra lightweight carbon fibre bottles with you while also being able to fill through a connector on the rifle
  16. New fast flow valve system
  17. Exclusive Factory-fit Huma Air Regulator
  18. Huge biggest in class (34cc) plenum chamber for more power
  19. Onboard high capacity Li-Po battery with charging port on rifle (charges via USB C connector)
  20. Weight (approx.) 3.1 kg (6.84 lbs) 60cm barrel model
  21. Length 840mm (34”) 60cm barrel model
  22. Electronic match trigger and multi adjustable blade positions

DeltaWolf can charge via connector or removable bottle

Despite being the most technologically advanced airgun of all time, Delta Wolf has been designed and built to be simpler to use, easier to tune and faster to service. Combined with its many ground-breaking new features, engineered-in reliability and shooting flexibility, 2020 is not just the year of the Delta Wolf… it’s the start of its decade!

Introduced to selected Daystate dealers in January at this year’s annual, trade-only SHOT Show in the USA – and widely broadcast across social network platforms – the secret is finally out about Daystate’s brand new concept air rifle!

The Delta Wolf, to confirm the forthcoming rifle’s title, is now in its advanced stages of development. The rifle, which features many exciting new technologies, will be ‘officially’ unveiled by Daystate at the IWA Nuremberg trade show in March, where feedback will determine the final production specifications the Delta Wolf will carry when it arrives in gun shops around summer of 2020.