Description
Microbore PCP Charging Hose
The Microbore PCP Charging Hose is a fill line designed to reduce the air that is wasted when ‘bleeding off’ after filling your PCP with compressed air. It achieves this due to a thinner bore in the whip line, so less volume to lose post-fill.
Construction
The heavy duty Microbore fill line is high pressure rated to 300 BAR (4,350psi). To help prevent kinking and creasing, the ends are protected by a synthetic anti-kink stress reliever. Unlike ‘metal’ stress relievers, this will not scratch your rifle should you catch it.
Length and Fitting
The Microbore Hose is 36cm long. At each end are zinc plated steel nuts with female 1/8 inch BSP threads. These are standard fittings, so you can easily screw them to your fill apparatus, and screw on your rifle’s charging adapter, such as a probe or Foster connector.
The fill line has an OD of 4.8mm and is coated with a heavy duty plastic sleeving. This gives it extra durability. This hose can be used when filling from a diver’s tank, a manual stirrup pump or direct from an air compressor.
Important
Always follow the correct safety procedures when charging your PCP air rifle.
