Description
HUNTSMAN FILLER PROBE – REGAL & REVERE
This Daystate Huntsman Filler Probe is for the regulated Regal and Revere PCP models. It is a push-fit adapter for charging air rifles with a push-in filling system. As well as the Huntsman and Revere PCP air rifles, it will also fit some other rifle models from other manufacturers which use a similar probe-fill charging system (eg BRK Brocock Compatto, Concept and Ranger XR models).
Balanced charging
The Daystate Huntsman Filler Probe ensures ‘balanced’ charging. This means the rifle’s main inlet valve will not be damaged during the air-filling process. The probe can be used with manual stirrup, diver’s tank or electric/combustion air compressor units.
Fitting
The probe requires a whip hose to connect to the main charging unit. Hose connections made via the standard 1/8″ BSP male thread.
Push-fits into PCP rifle, no tools required, and simply pulls out after charging process is complete. Always remember to follow the correct charging procedures.
Made of high-quality, machined brass, so will provide years of proper use. This connector is supplied with spare O-rings. This ensures an air-tight seal when filling.
NOTE:
This item is for use with probe-fill system Daystate Huntsman PCP models – the regulated Regal and Revere – and some models from other manufacturers. For older, non-regulated Daystate Huntsman models with lock-on filling systems, use this Foster type connector. If you need clarification, contact your Daystate dealer or fill out our contact form.
