Description
Foster Fill Connector (snap-on type)
This fill connector is the Foster type (locking) for filling Daystate PCP models, including Wolverine 2, Wolverine R, Red Wolf and Delta Wolf. It will also fit all other Daystate rifles from 1997 to 2016, with the exception of Huntsman Regal and Revere.
This snap-on connector will also fit some PCPs rifle models from other manufacturers. For example, BRK Brocock XR Series – Sniper, Commander, Concept and Compatto models.
Fitting
The probe requires a whip hose to connect to the main charging unit. Hose connections made via the standard 1/8″ BSP male thread (requires separate hose). Can be used with manual stirrup, diver’s tank or electric/combustion air compressor units.
Simply snaps on to male inlet port of PCP rifle, no tools required and locks firmly into place. Simply push-pull outer collar to unlock out after charging process is complete. Always remember to follow the correct charging procedures.
Made of high-quality metal to provide years of proper use.
NOTE:
This item is for use with Foster type snap-fit connectors used on many Daystate and Brocock PCPs (and models from other manufacturers). For Daystate models with probe-fit filling systems, use this type of connector. If you need clarification, contact your Daystate dealer – find your nearest here – or fill out our contact form. We aim to reply in 24 hours, but it may take longer over Bank Holiday, weekend, show and busy periods.
