Description
Daystate Valve Seat Seal
This Daystate Valve Seat Seal is a genuine factory part, manufactured to the tolerances required for your particular PCP model.
Key component
The main valve of a precharged pneumatic airgun is a key component. If it doesn’t work properly, the pistol or rifle will suffer poor performance. The gun’s power may fall short of expectations. Its shot-to-shot consistency will also be erratic, resulting in poor accuracy at the target. In the worst case scenario, a valve seal that does not seal properly may even leak, rendering the gun useless!
Quality Manufacturing
All Daystate Valve Seat Seals have been engineered to the highest standard, using state-of-the-art machinery. Additionally, they use the correct type and grade of materials (eg O-rings with the correct Shore rating). Warning: We do NOT recommend you use third party ‘pattern’ components.
Model Compatibility
The Valve Seat Seals we use will vary according to PCP model type and build year. Therefore, to ensure you order the correct seat for optimal performance, you will need to state the serial number and model type of your air rifle. Please state these in the boxes provided when ordering. Valve Seat Seals are available for the following Daystate PCP models:
- Red Wolf
- Wolverine
- Huntsman
- AirWolf
- Air Ranger
Fitting
Daystate recommends that any repairs, upgrades or key component changes are undertaken by an authorized Service Center.
However, if you feel competent to do the work yourself, we have a Technical Support page on our official website, where you will find valuable resources for your particular rifle model.