MK3 & Air Wolf - Resetting to defaults
The programming mode is entered by ensuring the gun is unloaded, in the safe position, pointing the muzzle in a safe direction (down) and pulling the trigger, then switch the safety catch to FIRE. The gun will then beep and flash indicating that the gun is in program mode. If the trigger is kept pulled, the gun will cycle through its programming mode and will beep and flash the appropriate amount of times, indicating the mode it is in.
Default Setting
The user can set the gun to a default condition to switch off all the features.
Default programming
- Ensure that the gun is unloaded and the safety switch is in the SAFE position
- Pull the trigger while plugging the charging lead in and the yellow/red charging light will be illuminated
- Keep trigger pulled until 7 beeps are heard
- Defaults have been restored:
- Magazine counter off
- Magazine counter set to zero
- Shot counter off
- Shot count set to zero
- Safety LED normally on
- Power set to maximum
You do not appear to have (at least) the Flash 7 plugin installed - you can find it here here or at the Adobe website http://www.adobe.com/products/flashplayer/ if you are on a mac or can't install the .exe file from the disc