Description
Blackwolf Spring Power Tuning Kit
For ‘HP’ (Hi Power) models only
The Hammer Spring Power Tuning Kit allows Daystate Blackwolf shooters to fine-tune their rifle for shooting different pellets or slugs. This is a genuine Daystate Performance Center upgrade.
Suitability
For all ‘export’ or Hi-Power (HP) models. The kit comprises six, color-coded springs of pre-set tensions, as fitted at the factory to the following configurations.
430mm (17in) barrels
-
- WHITE – .177 / 4.5mm rated up to 12 ft/lbs
- WHITE – .22 / 5.5mm rated up to 20 ft/lbs
- BLUE – .177 / 4.5mm rated up to 20 ft/lbs
- BLUE – .22 / 5.5mm rated up to 45 ft/lbs
600mm (23in) barrels
-
- RED – .177 / 4.5mm rated up to 31 ft/lbs
- RED – .22 / 5.5mm rated up to 61 ft/lbs
- RED – .25 / 6.35mm rated up to 70 ft/lbs
- BLACK – .30 / 7.62mm rated up to 95 ft/lbs
Special (28in) barrels
-
- GREEN – .22 (711mm RACE edition)
- YELLOW – HP+ models
In the Kit
There is one spring of each color supplied in the set; six springs in all. This allows you to experiment with different hammer spring tensions and fine-tune your own Blackwolf’s action to your favoured pellet and or slug. This is in addition to the onboard, 20-lever power adjustment wheel that is integral to all Daystate Blackwolf models.
Note for UK sub-12 ft/lbs (unlicenced) Blackwolf models – all configurations
By law, UK models do not allow adjustment above the factory-set maximum. Therefore these Hammer Springs are not suitable for UK sub-12ft/lbs models of the Blackwolf.
When ordering for ‘export’ or Hi-Power (HP) models, we require the serial no. to identify and confirm the original configuration of the rifle. Please indicate this in the box provided.
Daystate Warranty Notice
Dismantling your Daystate PCP air rifle or fitting certain replacement parts may affect the three-year warranty cover offered to the original purchaser. (Your statutory rights are not affected). If your PCP air rifle is still under manufacturer guarantee, we advise you to consult your authorised Daystate Agent before ordering parts or attempting repairs.
Additionally, we do not recommend you repair or service your Daystate PCP yourself, unless you feel qualified to do so. See: Daystate servicing guide.
